Keurig K Express is a popular single-serve coffee maker that offers convenience and simplicity to coffee lovers. However, like any other appliance, it can experience issues that affect its performance, such as Keurig K Express Not Pumping Water Or Coffee. If you are facing this problem, don’t worry. In this article, we will guide you through some troubleshooting steps to help you resolve the issue.
Common Reasons Why Your Keurig K Express Is Not Pumping Water Or Coffee?
1- Clogged Needle:
One of the most common reasons why your Keurig K Express may not be pumping water or coffee is a clogged needle. The needle is responsible for puncturing the K-Cup, allowing water to flow through it and into your cup.
Over time, the needle may become clogged with coffee grounds or mineral deposits, which can prevent water from flowing through it. This can lead to a reduction in the amount of coffee or water that your Keurig K Express is able to produce.
To fix this issue, you can use a paper clip or a needle to gently clean out the needle. Make sure to unplug your Keurig K Express before attempting this. Once you’ve cleaned the needle, run a few cycles of water through the machine to ensure that it’s working properly.
Another common reason why your Keurig K Express may not be pumping water or coffee is an airlock. An airlock occurs when the air becomes trapped in the water line, preventing water from flowing through the machine. To fix this issue, you can try the following steps:
- Fill the water reservoir to the maximum level.
- Turn the machine off and unplug it from the power outlet.
- Tilt the machine forward and backwards a few times to dislodge any air bubbles.
- Plug the machine back in and turn it on.
- Run a cycle of water through the machine to see if the issue has been resolved.
3- Blocked Water Line:
A blocked water line can also cause your Keurig K Express to stop pumping water or coffee. This can happen if the water line becomes clogged with mineral deposits or other debris. To fix this issue, you can try the following steps:
- Fill the water reservoir with a 50/50 mixture of white vinegar and water.
- Run a cycle of the vinegar mixture through the machine.
- Rinse the water reservoir and run a few cycles of water through the machine to ensure that all of the vinegar has been flushed out.
4- Broken Pump:
In some cases, a broken pump may be the reason why your Keurig K Express is not pumping water or coffee. A broken pump will prevent water from flowing through the machine and into your cup.
If you suspect that your pump is broken, you may need to replace it. You can contact Keurig’s customer service or bring your machine to a qualified technician to have it repaired.
READ ALSO: Keurig K Classic Review
Keurig K Express Not Pumping Water Or Coffee – Troubleshooting Guide:
Step 1: Check the Power Source
The first thing you should do when your Keurig K Express is not pumping water or coffee is to check if it is properly plugged in and if the outlet is working correctly. Sometimes, the issue might be as simple as a loose or disconnected power cord. Make sure the power cord is firmly connected to the coffee maker and the outlet.
Also, ensure that the outlet you are using is not faulty by plugging another appliance into it. If the outlet is not working correctly, you may need to call an electrician to fix it.
Step 2: Clean the Water Reservoir
If the power source is not the issue, the next thing to check is the water reservoir. The water reservoir is where you fill the Keurig K Express with water, and it is essential to the coffee-making process.
In addition, If the water reservoir is not cleaned regularly, it can become clogged with coffee grounds, mineral buildup, and other debris.
To clean the water reservoir, remove it from the Keurig K Express and empty any remaining water. Rinse the reservoir with hot water and dish soap, making sure to scrub away any buildup.
You can also use a mixture of vinegar and water to clean the reservoir. After cleaning, rinse the reservoir thoroughly and dry it before reinserting it into the Keurig K Express.
Step 3: Descale the Keurig K Express
If the water reservoir is clean and the Keurig K Express is still not pumping water or coffee, it might be time to descale the machine.
Descaling is the process of removing mineral buildup and other deposits that can accumulate inside the coffee maker over time. These deposits can clog the machine’s internal components, preventing water from flowing correctly.
To descale the Keurig K Express, you will need a descaling solution or a mixture of water and white vinegar. Follow these steps:
- Empty the water reservoir and remove any remaining water.
- Mix the descaling solution or water and vinegar in the reservoir.
- Place a large mug or cup under the brew head.
- Turn on the Keurig K Express and start a brewing cycle.
- Let the machine run until the reservoir is empty.
- Discard the contents of the mug and repeat the process until the reservoir is empty.
- Rinse the water reservoir thoroughly and fill it with fresh water.
- Run several brewing cycles with just water to rinse the machine and remove any remaining descaling solution.
Step 4: Check the Water Line
If descaling does not resolve the issue, the next thing to check is the water line. The water line is the tube that carries water from the reservoir to the machine’s internal components. Moreover, if the water line is clogged or disconnected, it can prevent water from flowing correctly.
To check the water line, you will need to disassemble the Keurig K Express. First, unplug the machine and remove the water reservoir.
Next, remove the bottom plate and the screws that secure the cover. Carefully lift the cover to expose the internal components of the Keurig K Express.
Locate the water line and check for any clogs or disconnected tubes. However, if you find any clogs, clean them out using a paper clip or a small brush. If you find any disconnected tubes, reattach them and make sure they are firmly secured.
Step 5: Check the Pump
If the water line is not clogged or disconnected, the issue might be with the pump. The pump is the component responsible for pumping water from the reservoir to the internal components of the Keurig K Express. If the pump is faulty, it can prevent water from flowing correctly.
To check the pump, you will need to disassemble the Keurig K Express following the same steps as in Step 4. Once you have access to the internal components, locate the pump and check for any visible signs of damage or wear. If the pump appears damaged or worn out, you may need to replace it.
Step 6: Contact Keurig Customer Support
If you have tried all the troubleshooting steps above and the Keurig K Express is still not pumping water or coffee, it might be time to contact Keurig customer support. Keurig has a dedicated customer support team that can help you resolve any issues with your coffee maker.
You can reach Keurig customer support via phone, email, or live chat. Make sure to have your Keurig K Express model number and serial number on hand when you contact customer support. They will likely ask you for this information to help diagnose the issue and provide the appropriate solution.
How can I prevent my Keurig K Express from getting clogged?
To prevent your Keurig K Express from getting clogged, make sure to use only Keurig-approved K-cups and follow the manufacturer's instructions for cleaning and descaling the machine regularly.
How often should I clean my Keurig K Express?
It is recommended that you clean your Keurig K Express every three to six months, or whenever you notice a decrease in the quality of the coffee it produces. This includes descaling the machine to remove mineral buildup and cleaning the needle to prevent clogs.
Can I use vinegar to clean my Keurig K Express?
Yes, vinegar can be used to clean your Keurig K Express. Mix equal parts of white vinegar and water and run the machine through a brew cycle. Then, run several cycles of plain water to rinse out the vinegar.
At last, if your Keurig K Express is not pumping water or coffee, there are several troubleshooting steps that discuss above in the article, you can take to resolve the issue. ReaWith these steps, you should be able to get your Keurig K Express back to pumping water and coffee in no time.