How to Fix Keurig Leaking from Top?

How to Fix Keurig Leaking from Top? As a coffee enthusiast and avid Keurig user, I know how frustrating it can be when your machine starts leaking from the top.

Moreover, Not only can it create a mess, but it can also be a safety hazard if water comes into contact with electrical components. Luckily, there are several reasons why your Keurig may be leaking and solutions to fix the issue.

How to Fix Keurig Leaking from Top?

In this article, I’ll guide you through the common causes of a Keurig leaking from the top and provide you with step-by-step instructions on how to fix it.

We’ll also cover preventive measures that can help you avoid leaks in the future. With these tips and tricks, you’ll be able to enjoy your favorite cup of coffee without the hassle and worry of a leaking Keurig.

Reasons Why Your Keurig is Leaking From the Top?

1- Clogged Needle:

A clogged needle is one of the most common reasons why your Keurig might be leaking from the top. When the needle gets clogged with coffee grounds, it can cause water to overflow and leak from the top.

Therefore, to fix this, you’ll need to clean the needle by removing the pod holder, taking out the needle, and using a paper clip to unclog it.

2- Damaged Seal:

Another common cause of a Keurig leaking from the top is a damaged seal. The seal is responsible for preventing water from leaking out of the machine, and if it’s damaged, it can cause water to leak from the top.

Therefore, to fix this, you’ll need to replace the seal, which can be done by ordering a replacement part and following the manufacturer’s instructions.

3- Loose Water Reservoir:

If your Keurig’s water reservoir is loose, it can cause water to leak from the top. To fix this, you’ll need to make sure that the reservoir is properly attached to the machine. Moreover, Check the alignment of the reservoir and the machine, and ensure that it’s securely in place.

How to Fix a Keurig Leaking From the Top:

Now that we’ve covered the common causes of a Keurig leaking from the top, let’s dive into the step-by-step instructions on how to fix it.

1- Unclog the Needle:

Firstly, to fix a clogged needle, start by removing the pod holder and taking out the needle. Next, use a paper clip to unclog the needle by inserting it into the needle’s opening and gently moving it back and forth.  Therefore, once the needle is unclogged, reattach it to the pod holder and reassemble the machine.

2- Replace the Seal:

To replace a damaged seal, order a replacement part from the manufacturer and follow the instructions provided.  Generally, you’ll need to remove the old seal and clean the area where the new seal will be placed. And also, attach the new seal according to the manufacturer’s instructions.

3-Secure the Water Reservoir:

To secure the water reservoir, make sure that it’s properly aligned with the machine and that it’s securely in place. If the reservoir is loose, remove it and reattach it, ensuring that it’s securely fastened.

Preventive Measures:

To avoid a Keurig leaking from the top in the future, there are several preventive measures that you can take:

Use Quality Coffee:

Using high-quality coffee can reduce the chances of your Keurig becoming clogged with coffee grounds, which can lead to leaks.

Clean Your Machine Regularly:

Cleaning your Keurig regularly can help prevent clogs and other issues that can lead to leaks. Be sure to follow the manufacturer’s instructions for cleaning your machine.

Check the Reservoir:

Before brewing your coffee, check that the water reservoir is securely attached to the machine to prevent leaks.

Check the water reservoir and lid

Another potential cause of a Keurig leaking from the top is a problem with the water reservoir or the lid. If the reservoir is overfilled, water may spill out from the top during brewing.

Similarly, if the lid is not properly closed or is damaged, water may leak out from the top during brewing.

To check the water reservoir, remove it from the Keurig and check the water level. If it is too high, pour some water out until it is below the maximum fill line. If the reservoir is damaged, it will need to be replaced.

Lastly,  check the lid, and make sure it is securely in place and properly closed before starting a brewing cycle. If the lid is damaged or not fitting properly, it will need to be replaced.

Clean the machine

A dirty or clogged Keurig can also cause it to leak from the top. Over time, mineral buildup and coffee grounds can accumulate inside the machine, causing blockages and interfering with the brewing process.

To clean your Keurig, follow these steps:

1- Turn off and unplug the machine

2- Remove the water reservoir and empty any remaining water

3- Wipe down the exterior with a damp cloth

4- Use a paperclip or a needle to clear any blockages in the needles that pierce the K-Cup

5- Run a cleaning cycle using a Keurig descaling solution or white vinegar

6- Rinse the machine by running several cycles of just water

7- Regular cleaning can help prevent leaks and ensure your Keurig is working properly.


Why is my Keurig not brewing a full cup?

If your Keurig is not brewing a full cup, it may be due to several reasons such as clogged needles, a low water level, a dirty machine, or a faulty machine. You can try cleaning the needles and the machine, ensuring that the water level is sufficient, and troubleshooting other issues to fix the problem.

How often should I clean my Keurig?

To keep your Keurig working properly and avoid issues like incomplete brewing, leaking, or clogging, it is recommended to clean your machine every three to six months. However, if you use your Keurig frequently, live in an area with hard water, or notice any issues with your machine, you may need to clean it more often.

Can I use vinegar to clean my Keurig?

Yes, you can use vinegar to clean your Keurig. White vinegar is a natural and effective cleaning solution that can help remove mineral buildup and other debris inside your machine. To use vinegar, mix equal parts of white vinegar and water, pour the solution into the water reservoir, and run several brewing cycles with just water to rinse the machine.


A leaking Keurig can be frustrating, but there are several simple steps you can take to diagnose and fix the problem.  Moreover, By checking the water reservoir, the needles, and the machine’s components, and cleaning the machine regularly,  you can get your Keurig working properly.

Emily Anderson
About the author

Emily Anderson is a coffee aficionado, a certified barista, and the founder of, a comprehensive online resource for coffee enthusiasts. With a deep appreciation for the diverse aspects of coffee, Emily is dedicated to providing readers with a wealth of information about different types of coffee, brewing methods, coffee products, and everything in between.

Leave a Comment