Fixing Keurig Still Says Descale After Descaling

Fixing Keurig Still Says Descale After Descaling۔ As a coffee lover and Keurig owner, I know how frustrating it can be when your machine still says “Descale” after you’ve already descaled it.

This issue can cause a decrease in performance and eventually lead to damage if not addressed promptly.

In this article, I will share my personal experience and tips on how to troubleshoot and fix this problem, so you can enjoy a fresh cup of coffee without any interruptions.

Fixing Keurig Still Says Descale After Descaling

Descaling is an essential maintenance step for Keurig machines, as mineral buildup from water can cause performance issues.

However, even after descaling, the “Descale” message may continue to appear. Don’t worry, there are several solutions to this problem, and I will cover them in detail.

By following these steps, you can ensure your Keurig is functioning correctly, and you can continue to enjoy your favorite brew. So let’s dive into the solutions and get your Keurig up and running again!

Fixing Keurig Still Says Descale After Descaling- Tips on How to Troubleshoot and Fix It?

As a coffee lover, I understand how frustrating it can be when your Keurig machine still says “Descale” after you’ve already descaled it.

It’s important to address this issue quickly, as not doing so can lead to decreased performance and eventually even damage to the machine.

In this article, I’ll share some tips on how to troubleshoot and fix this problem, so you can enjoy a fresh cup of coffee without any interruptions.

First, it’s important to understand what “descaling” actually means. Descaling is the process of removing mineral buildup from the inside of your Keurig machine.

This buildup can occur over time from the minerals present in your water supply. When too much buildup occurs, it can cause your machine to function poorly, which is why descaling is so important.

1- Check the Water Reservoir

The first thing to check is the water reservoir. Sometimes, the descaling solution can leave residue in the reservoir, which can cause the machine to continue to display the “Descale” message.

To fix this, remove the water reservoir and rinse it out thoroughly with clean water. Then, fill it back up with fresh water and try running a brew cycle.

2- Run More Water Through the System

Another tip is to run more water through the system after you’ve descaled it. This can help flush out any remaining residue or buildup that may be causing the machine to display the “Descale” message.

To do this, simply fill the water reservoir with fresh water and run several brew cycles until the water runs clear.

3- Clean the Needles

The needles on your Keurig machine can also become clogged with mineral buildup, which can cause the “Descale” message to appear even after you’ve descaled the machine.

To fix this, turn off the machine and unplug it from the power source. Then, using a paperclip or needle, gently clean out the needles by inserting the paperclip or needle into the holes and wiggling it around to remove any buildup.

Be careful not to damage the needles while doing this.

4- Use Distilled Water

Using distilled water instead of tap water can help prevent mineral buildup in your Keurig machine. Distilled water is free from minerals, so it won’t leave any residue behind in your machine.

While it may be a bit more expensive, using distilled water can help prolong the life of your Keurig machine and prevent issues like the “Descale” message from appearing.

5- Contact Customer Support

If you’ve tried all of these tips and the “Descale” message is still appearing on your Keurig machine, it may be time to contact customer support.

They can help troubleshoot the issue and provide guidance on how to fix the problem. Be sure to have your machine’s model number and serial number on hand when you contact customer support.


How often should I descale my Keurig?

It's recommended to descale your Keurig every three to six months, depending on how often you use it and the mineral content of your water. If you notice a decrease in performance or the Descale message appears, it's time to descale the machine.

Can I use vinegar to descale my Keurig?

Yes, you can use vinegar to descale your Keurig machine. Mix equal parts of white vinegar and water, then run the solution through your machine as you would with a commercial descaling solution. Be sure to run several brew cycles with fresh water afterward to remove any vinegar residue.

Why is my Keurig brewing weak coffee?

Weak coffee from a Keurig machine can be caused by several factors, including an incorrect water-to-coffee ratio, clogged needles, or mineral buildup. To fix the issue, try adjusting the water-to-coffee ratio, cleaning the needles, descaling the machine, or using a different type of coffee pod.

Conclusion- Fixing Keurig Still Says Descale After Descaling

Overall, a Keurig machine that still says “Descale” after descaling can be frustrating, but there are several steps you can take to fix the problem.

By checking the water reservoir, running more water through the system, cleaning the needles, using distilled water, and contacting customer support if necessary, you can ensure your Keurig machine is functioning properly and continue to enjoy your favorite cup of coffee.

Emily Anderson
About the author

Emily Anderson is a coffee aficionado, a certified barista, and the founder of, a comprehensive online resource for coffee enthusiasts. With a deep appreciation for the diverse aspects of coffee, Emily is dedicated to providing readers with a wealth of information about different types of coffee, brewing methods, coffee products, and everything in between.

Leave a Comment